ArcticInsider Message Board: Speed Werx Clutch Kit - ArcticInsider Message Board

Jump to content

Page 1 of 1
  • You cannot start a new topic
  • You cannot reply to this topic

Speed Werx Clutch Kit

#1 User is offline   Sno-Pro 500 Icon

  • Kitty Cat
  • PipPip
  • Group: Members
  • Posts: 26
  • Joined: 22-February 11
  • LocationWoodbury MN
  • My Sled(s):2015 6000 R XC
    2014 Sno-Pro 6000Cross Country
    2014 Sno-Pro 500
    2011 F5 LXR
    2002 500 CCE
  • My Atv(s):Polaris 550 Camo
    2012 Ranger 800 XP

Posted 22 February 2011 - 09:10 PM

Can anyone give some feedback on the Speedwerx Sno-Pro 500 Clutch kit? is it worth the money?
0

#2 User is offline   pdw Icon

  • Puma
  • PipPipPipPip
  • Group: Members
  • Posts: 85
  • Joined: 14-January 10
  • LocationOntario
  • My Sled(s):2010 SnoPro 500

Posted 23 February 2011 - 10:08 AM

View PostSno-Pro 500, on 22 February 2011 - 09:10 PM, said:

Can anyone give some feedback on the Speedwerx Sno-Pro 500 Clutch kit? is it worth the money?

Word on the street is that it is a great mod. Turns it into an animal (apparently)
Its a cheap enough mod that Ill take the chance on it next season. (Along with a suspension upgrade :( )
0

#3 User is offline   Sno-Pro 500 Icon

  • Kitty Cat
  • PipPip
  • Group: Members
  • Posts: 26
  • Joined: 22-February 11
  • LocationWoodbury MN
  • My Sled(s):2015 6000 R XC
    2014 Sno-Pro 6000Cross Country
    2014 Sno-Pro 500
    2011 F5 LXR
    2002 500 CCE
  • My Atv(s):Polaris 550 Camo
    2012 Ranger 800 XP

Posted 23 February 2011 - 07:34 PM

View Postpdw, on 23 February 2011 - 10:08 AM, said:

Word on the street is that it is a great mod. Turns it into an animal (apparently)
Its a cheap enough mod that Ill take the chance on it next season. (Along with a suspension upgrade :( )

Thanks... I had seen a segemnet on Sledhead a few weeks ago about some mods they did. But they did the clutch kit,timing key and the pipe mod.. Only worry is where does engaugement go? They already engauge at 4900.
Thanks
0

#4 User is offline   messed-up Icon

  • Lynx
  • PipPip
  • Group: Members
  • Posts: 32
  • Joined: 06-October 09
  • My Sled(s):2012 F1100sp
    2010 sno pro 500
    2000 z 440
  • My Atv(s):2009 Prowler XtX 700

Posted 24 February 2011 - 08:33 PM

View PostSno-Pro 500, on 23 February 2011 - 07:34 PM, said:

Thanks... I had seen a segemnet on Sledhead a few weeks ago about some mods they did. But they did the clutch kit,timing key and the pipe mod.. Only worry is where does engaugement go? They already engauge at 4900.
Thanks


My engagment w/the kit is at 5200.
0

#5 User is offline   clem Icon

  • Puma
  • PipPipPip
  • Group: Members
  • Posts: 59
  • Joined: 21-October 09
  • LocationEast Grand Forks, Minnesota
  • My Sled(s):Current: 2010 Sno Pro 500
    Past: 2003 F5
    1995 Z440

Posted 25 February 2011 - 12:47 PM

View Postmessed-up, on 24 February 2011 - 08:33 PM, said:

My engagment w/the kit is at 5200.

did you gain anything on the top end with the kit the one i rode with the kit just had a little more grunt on low end
0

#6 User is offline   messed-up Icon

  • Lynx
  • PipPip
  • Group: Members
  • Posts: 32
  • Joined: 06-October 09
  • My Sled(s):2012 F1100sp
    2010 sno pro 500
    2000 z 440
  • My Atv(s):2009 Prowler XtX 700

Posted 26 February 2011 - 01:55 PM

View Postclem, on 25 February 2011 - 12:47 PM, said:

did you gain anything on the top end with the kit the one i rode with the kit just had a little more grunt on low end




no top end gains -- just gets there quicker. I did break a primary spring though. Got it replaced and has been fine since. I removed the kit for this weekends riding as I am trying to track down a vibration.
0

#7 User is offline   Sno-Pro 500 Icon

  • Kitty Cat
  • PipPip
  • Group: Members
  • Posts: 26
  • Joined: 22-February 11
  • LocationWoodbury MN
  • My Sled(s):2015 6000 R XC
    2014 Sno-Pro 6000Cross Country
    2014 Sno-Pro 500
    2011 F5 LXR
    2002 500 CCE
  • My Atv(s):Polaris 550 Camo
    2012 Ranger 800 XP

Posted 26 February 2011 - 07:15 PM

View Postmessed-up, on 24 February 2011 - 08:33 PM, said:

My engagment w/the kit is at 5200.
How do you like it? Does it pull harder like they say? Did you also do the timing key or other Mods?
0

#8 User is offline   messed-up Icon

  • Lynx
  • PipPip
  • Group: Members
  • Posts: 32
  • Joined: 06-October 09
  • My Sled(s):2012 F1100sp
    2010 sno pro 500
    2000 z 440
  • My Atv(s):2009 Prowler XtX 700

Posted 01 March 2011 - 09:15 PM

View PostSno-Pro 500, on 26 February 2011 - 07:15 PM, said:

How do you like it? Does it pull harder like they say? Did you also do the timing key or other Mods?


No other mods. So I ran the stock clutching w/the belt from the Speedwerxs kit for a couple hundred miles. The stock set up actually pulls up to 45-50 mph quicker but does not have the backshifting of the Speedwerxs set up. Still have a vibration.
0

#9 User is offline   Sno-Pro 500 Icon

  • Kitty Cat
  • PipPip
  • Group: Members
  • Posts: 26
  • Joined: 22-February 11
  • LocationWoodbury MN
  • My Sled(s):2015 6000 R XC
    2014 Sno-Pro 6000Cross Country
    2014 Sno-Pro 500
    2011 F5 LXR
    2002 500 CCE
  • My Atv(s):Polaris 550 Camo
    2012 Ranger 800 XP

Posted 02 March 2011 - 07:31 PM

View Postmessed-up, on 01 March 2011 - 09:15 PM, said:

No other mods. So I ran the stock clutching w/the belt from the Speedwerxs kit for a couple hundred miles. The stock set up actually pulls up to 45-50 mph quicker but does not have the backshifting of the Speedwerxs set up. Still have a vibration.

When are you getting the vibration? what speed? jackshaft?
0

#10 User is offline   messed-up Icon

  • Lynx
  • PipPip
  • Group: Members
  • Posts: 32
  • Joined: 06-October 09
  • My Sled(s):2012 F1100sp
    2010 sno pro 500
    2000 z 440
  • My Atv(s):2009 Prowler XtX 700

Posted 03 March 2011 - 10:55 AM

View PostSno-Pro 500, on 02 March 2011 - 07:31 PM, said:

When are you getting the vibration? what speed? jackshaft?




At steady speeds above 40mph. Have done jackshaft bearing. Have to have been riding for awhile before the vibration starts. Feel it in my feet mostly. I am starting to think it is ice build-up.
0

#11 User is offline   pdw Icon

  • Puma
  • PipPipPipPip
  • Group: Members
  • Posts: 85
  • Joined: 14-January 10
  • LocationOntario
  • My Sled(s):2010 SnoPro 500

Posted 10 March 2011 - 09:57 AM

heres a new vid I found about upgrading the SP5.
It from Speedwerx so its biased but still, good info.
0

#12 User is offline   ax600 Icon

  • Kitty Cat
  • Pip
  • Group: Members
  • Posts: 1
  • Joined: 05-January 14
  • My Sled(s):2012 sno pro 500/ 2002 zrt 600 w/ d&d 1004
  • My Atv(s):2006 colworx buggy/ 06 honda trx 450r

Posted 05 January 2014 - 06:43 PM

View Postmessed-up, on 03 March 2011 - 10:55 AM, said:

At steady speeds above 40mph. Have done jackshaft bearing. Have to have been riding for awhile before the vibration starts. Feel it in my feet mostly. I am starting to think it is ice build-up.
you may want to check the runout on your jackshaft. I had a bearing go out on mine and the jackshaft got tweaked a bit in the proscess. Giving a vibration thru the running boards.
0

Page 1 of 1
  • You cannot start a new topic
  • You cannot reply to this topic

1 User(s) are reading this topic
0 members, 1 guests, 0 anonymous users