ArcticInsider Message Board: Added Some Accessories - ArcticInsider Message Board

Jump to content

Page 1 of 1
  • You cannot start a new topic
  • You cannot reply to this topic

Added Some Accessories

#1 User is offline   rws Icon

  • Kitty Cat
  • PipPipPip
  • Group: Members
  • Posts: 68
  • Joined: 02-October 10
  • LocationNorth Dakota
  • My Sled(s):2015 XF8000 SnoPro Limited

Posted 12 November 2017 - 07:35 AM

to my 2018 ZR RR. Still waiting for Pro front bumper, tall windshield, rear wheel kit, skid plate and deluxe cover.

I installed 4 live circuits for always hot power for GPS, electric face shield, USB port for charging helmet cam battery and a couple of LED courtesy lights.

Posted Image

Mounted a Garmin Montana 610 GPS, SPOT satellite tracker and handlebar bag

Posted Image

small LED lights mounted on either side of GPS

Posted Image

USB port in handlebar bag

Posted Image

red switch for LED courtesy lights

Posted Image

lights up around sled pretty good...for those trail stops at night when you need a little light

Posted Image

my world famous quick detachable ice scratchers...only run them when needed otherwise stored in rear bag

Posted Image

Posted Image

Posted Image

replaced the puny factory installed bag with a larger one

Posted Image
0

#2 User is offline   FeelTheThunder Icon

  • Kitty Cat
  • Pip
  • Group: Members
  • Posts: 7
  • Joined: 24-December 13
  • LocationLake of the Woods, ON, Canada
  • My Sled(s):1992 Wildcat 700 EFIMC
    1999 ZR700
    2000 Thundercat
    2001 Pantera 1000
    2002 Thundercat
    2005 Z370
  • My Atv(s):2008 TRV 700
    2009 DVX 300

Posted 12 November 2017 - 09:09 PM

brings back the old times

Attached File(s)


0

#3 User is offline   FeelTheThunder Icon

  • Kitty Cat
  • Pip
  • Group: Members
  • Posts: 7
  • Joined: 24-December 13
  • LocationLake of the Woods, ON, Canada
  • My Sled(s):1992 Wildcat 700 EFIMC
    1999 ZR700
    2000 Thundercat
    2001 Pantera 1000
    2002 Thundercat
    2005 Z370
  • My Atv(s):2008 TRV 700
    2009 DVX 300

Posted 12 November 2017 - 09:12 PM

Try again

Attached File(s)


0

#4 User is offline   rws Icon

  • Kitty Cat
  • PipPipPip
  • Group: Members
  • Posts: 68
  • Joined: 02-October 10
  • LocationNorth Dakota
  • My Sled(s):2015 XF8000 SnoPro Limited

Posted 16 November 2017 - 06:19 AM

View PostFeelTheThunder, on 12 November 2017 - 09:12 PM, said:

Try again


Do you think I brought enough gas along? :eyes-poppin:
0

#5 User is offline   rschafer Icon

  • Kitty Cat
  • Pip
  • Group: Members
  • Posts: 2
  • Joined: 27-October 09
  • LocationLake City MN
  • My Sled(s):2017 600 El Tigre
    2018 ZR 800 LTD

Posted 18 November 2017 - 09:49 AM

Looks Good! I like your idea on the ice scratchers- could you be so kind to post a few more pictures as to the fabrication and mounting? Thanks!
0

#6 User is offline   rws Icon

  • Kitty Cat
  • PipPipPip
  • Group: Members
  • Posts: 68
  • Joined: 02-October 10
  • LocationNorth Dakota
  • My Sled(s):2015 XF8000 SnoPro Limited

Posted 20 November 2017 - 04:55 PM

installed the higher windshield and mirrors, skid plate, rear wheel kit and saddle bags only used for those multi-day saddlebag rides otherwise stored in the garage.

still waiting on the Pro front bumper

Posted Image

Posted Image

Posted Image

Posted Image

Posted Image
0

#7 User is offline   rws Icon

  • Kitty Cat
  • PipPipPip
  • Group: Members
  • Posts: 68
  • Joined: 02-October 10
  • LocationNorth Dakota
  • My Sled(s):2015 XF8000 SnoPro Limited

Posted 20 November 2017 - 05:13 PM

View Postrschafer, on 18 November 2017 - 09:49 AM, said:

Looks Good! I like your idea on the ice scratchers- could you be so kind to post a few more pictures as to the fabrication and mounting? Thanks!


Here's the only other picture I have. Between this and the other pictures above you should be able to see how I made the mounting brackets using angle iron and square tubing. The larger angle iron is drilled to fit over the rear skag mounting bolts. The square tubing is welded to that larger angle iron. The Duraflex scratchers are mounted to the smaller angle iron that slides into the square tubing. Notice how the bolt through the square tubing is keyed so the spring clip cannot rotate.

Posted Image
0

#8 User is offline   rschafer Icon

  • Kitty Cat
  • Pip
  • Group: Members
  • Posts: 2
  • Joined: 27-October 09
  • LocationLake City MN
  • My Sled(s):2017 600 El Tigre
    2018 ZR 800 LTD

Posted 23 November 2017 - 10:03 AM

View Postrws, on 20 November 2017 - 05:13 PM, said:

Here's the only other picture I have. Between this and the other pictures above you should be able to see how I made the mounting brackets using angle iron and square tubing. The larger angle iron is drilled to fit over the rear skag mounting bolts. The square tubing is welded to that larger angle iron. The Duraflex scratchers are mounted to the smaller angle iron that slides into the square tubing. Notice how the bolt through the square tubing is keyed so the spring clip cannot rotate.

Posted Image


Thanks rws. Your pictures have been a great help! Happy Thanksgiving and have a great riding season. I will be trying out that ice scratcher design!
0

Page 1 of 1
  • You cannot start a new topic
  • You cannot reply to this topic

1 User(s) are reading this topic
0 members, 1 guests, 0 anonymous users